ChemistryLab.jl

Appearance

References ​

  • Anderson, G. M. and Crerar, D. A. (1993). Thermodynamics in Geochemistry: The Equilibrium Model (Oxford University Press, New York).

  • Baroghel-Bouny, V.; Mainguy, M.; Lassabatere, T. and Coussy, O. (1999). Characterization and identification of equilibrium and transfer moisture properties for ordinary and high-performance cementitious materials. Cement and Concrete Research 29, 1225–1238.

  • Chen, W. and Brouwers, H. J. (2007). The hydration of slag, part 1: reaction models for alkali-activated slag. Journal of Materials Science 42, 428–443.

  • Chen, W. and Brouwers, H. J. (2007). The hydration of slag, part 2: reaction models for blended cement. Journal of Materials Science 42, 444–464.

  • Davies, C. W. (1962). Ion Association (Butterworths, London).

  • Durdziński, P. T.; Ben Haha, M.; Bernal, S. A.; De Belie, N.; Gruyaert, E.; Lothenbach, B.; Menéndez Méndez, E.; Provis, J. L.; Schöler, A.; Stabler, C.; Tan, Z.; Villagrán Zaccardi, Y.; Vollpracht, A.; Winnefeld, F.; Zając, M. and Scrivener, K. L. (2017). Outcomes of the RILEM round robin on degree of reaction of slag and fly ash in blended cements. Materials and Structures 50, 135.

  • Dzombak, D. A. and Morel, F. M. (1990). Surface Complexation Modeling: Hydrous Ferric Oxide (Wiley-Interscience, New York).

  • Glynn, P. D. and Reardon, E. J. (1990). Solid-solution aqueous-solution equilibria; thermodynamic theory and representation. American Journal of Science 290, 164–201.

  • Hamer, W. J. and Wu, Y.-C. (1972). Osmotic Coefficients and Mean Activity Coefficients of Uni-univalent Electrolytes in Water at 25 °C. Journal of Physical and Chemical Reference Data 1, 1047–1100.

  • Helgeson, H. C. (1969). Thermodynamics of hydrothermal systems at elevated temperatures and pressures. American Journal of Science 267, 729–804.

  • Helgeson, H. C.; Kirkham, D. H. and Flowers, G. C. (1981). Theoretical prediction of the thermodynamic behavior of aqueous electrolytes by high pressures and temperatures; IV, Calculation of activity coefficients, osmotic coefficients, and apparent molal and standard and relative partial molal properties to 600 degrees C and 5kb. American Journal of Science 281, 1249–1516.

  • Jansen, D.; Goetz-Neunhoeffer, F.; Lothenbach, B. and Neubauer, J. (2012). The early hydration of ordinary Portland cement (OPC): an approach comparing measured heat flow with calculated heat flow from QXRD. Cement and Concrete Research 42, 134–138.

  • Jägle, E.; Timothy, J. J.; Jansen, D. and Machner, A. (2025). Deriving early hydration cement paste phase assemblage, microstructure development and elastic properties using thermodynamic simulation and multi-scale material modeling. Cement and Concrete Research 195, 107830.

  • Kulik, D. A. (2002). Gibbs energy minimization approach to modeling sorption equilibria at the mineral-water interface: Thermodynamic relations for multi-site-surface complexation. American Journal of Science 302, 227–279.

  • Kulik, D. A. (2006). Classic adsorption isotherms incorporated in modern surface complexation models: Implications for sorption of actinides. Radiochimica Acta 94, 765–778.

  • Kulik, D. A. (2011). Improving the structural consistency of C-S-H solid solution thermodynamic models. Cement and Concrete Research 41, 477–495.

  • Kulik, D. A.; Wagner, T.; Dmytrieva, S. V.; Kosakowski, G.; Hingerl, F. F.; Chudnenko, K. V. and Berner, U. R. (2013). GEM-Selektor geochemical modeling package: revised algorithm and GEMS3K numerical kernel for coupled simulation codes. Computational Geosciences 17, 1–24.

  • Lavergne, F.; Ben Fraj, A.; Bayane, I. and Barthélémy, J.-F. (2018). Estimating the mechanical properties of hydrating blended cementitious materials: an investigation based on micromechanics. Cement and Concrete Research 104, 37–60.

  • Leal, A. M.; Kulik, D. A.; Smith, W. R. and Saar, M. O. (2017). An overview of computational methods for chemical equilibrium and kinetic calculations for geochemical and reactive transport modeling. Pure and Applied Chemistry 89, 597–643.

  • Lothenbach, B.; Kulik, D. A.; Matschei, T.; Balonis, M.; Baquerizo, L.; Dilnesa, B.; Miron, G. D. and Myers, R. J. (2019). Cemdata18: A chemical thermodynamic database for hydrated Portland cements and alkali-activated materials. Cement and Concrete Research 115, 472–506.

  • Lothenbach, B.; Matschei, T.; Möschner, G. and Glasser, F. P. (2008). Thermodynamic modelling of the effect of temperature on the hydration and porosity of Portland cement. Cement and Concrete Research 38, 1–18.

  • Lothenbach, B. and Winnefeld, F. (2006). Thermodynamic modelling of the hydration of Portland cement. Cement and Concrete Research 36, 209–226.

  • Ma, B. and Lothenbach, B. (2020). Synthesis, characterization, and thermodynamic study of selected Na-based zeolites. Cement and Concrete Research 135, 106111.

  • Ma, B. and Lothenbach, B. (2021). Synthesis, characterization, and thermodynamic study of selected K-based zeolites. Cement and Concrete Research 148, 106537.

  • Marinich, O.; Miron, G. D.; Kulik, D. A.; Fernandes, M. M. and Baeyens, B. (2025). ClaySor 2023: Implementation of the 2SPNE SC/CE sorption model and database for deep geological repository safety assessment. Applied Geochemistry 191, 106510.

  • Matschei, T.; Lothenbach, B. and Glasser, F. P. (2007). The role of calcium carbonate in cement hydration. Cement and Concrete Research 37, 551–558.

  • Myers, R. J.; Bernal, S. A. and Provis, J. L. (2014). A thermodynamic model for C-(N-)A-S-H gel: CNASH_ss. Derivation and validation. Cement and Concrete Research 66, 27–47.

  • Palandri, J. L. and Kharaka, Y. K. (2004). A compilation of rate parameters of water-mineral interaction kinetics for application to geochemical modeling. Open-File Report 2004-1068 (U.S. Geological Survey).

  • Parkhurst, D. L. and Appelo, C. A. (2013). Description of input and examples for PHREEQC version 3: A computer program for speciation, batch-reaction, one-dimensional transport, and inverse geochemical calculations. Techniques and Methods 6-A43 (U.S. Geological Survey).

  • Parrott, L. J. and Killoh, D. C. (1984). Prediction of cement hydration. In: British Ceramic Proceedings, No. 35; pp. 41–53.

  • Powers, T. C. (1948). A discussion of cement hydration in relation to the curing of concrete. Proceedings of the Highway Research Board 27, 178–188.

  • Robie, R. A. and Hemingway, B. S. (1995). Thermodynamic properties of minerals and related substances at 298.15 K and 1 bar (10⁵ pascals) pressure and at higher temperatures. Bulletin 2131 (U.S. Geological Survey).

  • Schindler, A. K. and Folliard, K. J. (2005). Heat of hydration models for cementitious materials. ACI Materials Journal 102, 24–33.

  • Tanger, J. C. and Helgeson, H. C. (1988). Calculation of the thermodynamic and transport properties of aqueous species at high pressures and temperatures; revised equations of state for the standard partial molal properties of ions and electrolytes. American Journal of Science 288, 19–98.

  • Xu, T.; Spycher, N.; Sonnenthal, E.; Zhang, G.; Zheng, L. and Pruess, K. (2011). TOUGHREACT Version 2.0: A simulator for subsurface reactive transport under non-isothermal multiphase flow conditions. Computers & Geosciences 37, 763–774.

  • Šmilauer, V.; Edelmannová, J. and Reiterman, P. (2026). Isothermal calorimetry database of 65 cements with analytical approximations. Ceramics – Silikáty 70, 25–33.

  • Šmilauer, V. and Reiterman, P. (2025). Isothermal calorimetry database of 65 cements and approximations. Data set, licensed CC-BY-4.0.